Pulsed Lasers Blog Posts

SOL Lasers for Material Processing and Marking

The SOL Lasers for Material Processing and Marking are the most compact Q-switched DPSS nanosecond laser available in the 4W to 40W power range. These air-cooled DPSS nanosecond lasers are offered in a rugged and lightweight single unit, designed to allow easy and reliable integration in micro-machining and marking applications.

The SOL single unit design is based on a permanently aligned monolithic optical resonator integrated with 24 Vdc powered driving electronics. Cooling of the unit is provided by low noise fans.

Due to the Single Unit design, optical fibers and other delicate cable connections will not be necessary for system integration. Compactness, insensitivity to environmental conditions and ease of handling guarantee superior operational flexibility and performance/cost ratio. The high peak power and the excellent beam quality of SOL lasers make them the ideal source for the most demanding industrial and scientific applications.

The new electronic interface allows the user to integrate the laser according to the most recent safety standards for industrial machines (EN 13849) and to monitor the laser status through an RS232 port.  A new version of the Control Box and a new proprietary Software Interface are available for simplified remote control and monitoring. See our new Lasers 101 page for in depth information on Solid State Lasers.

SOL Laser Features

  • Up to 40W @ 1064nm
  • Up to 10W @ 532nm
  • 300 kW peak power
  • Compact Air-cooled Single Unit
  • Up to 200 kHz repetition rate
  • Electronic pulse energy modulation
  • Sealed and rugged
  • Monolithic design
  • 24 V dc
  • RS232 monitor port

Options Available:120 nm thick ITO layer removal on polymeric substrate

  • Beam expanding and collimating optics
  • Fiber Coupling
  • Red aiming beam
  • Extended operating temperature range
  • Extended frequency range
  • Pulse width modulation
  • Circular Polarization
  • Monitoring Photodiode
  • Remote Control Box and Software Interface
  • AC-DC Power Supply

SOL Laser Applications* clean ITO removal * undamaged polymeric substrate * tested for electrical insulation

  • Material Processing
  • Marking
  • Scribing
  • Thin film removal
  • Micro-machining
  • Nonlinear optics
  • Medical and Aesthetic

   SOL Laser Datasheet   

 

RPMC Lasers strives to provide lasers and laser modules at an affordable price while also providing top-notch customer service.

Therefore, we believe we are the best option for ALL your DPSS Laser and Laser Diode needs!

Contact RPMC Lasers by Phone: 636-272-7227 or Email: [email protected]

   Contact Us   

 

Leave a Reply